Satin Chrome Velvet Blue 1.52m x 18m

Conformable and flexible hybrid material. Suitable for car wrapping (smooth or medium curved surface). Comes with a selection of 7 fancy colors to create the distinctive appearance and improve a car's aesthetics. Memory killed at over 90 Celsius with post-heating. Dimensional stability -1-2mm in 1 year.
Thickness of film (C=10 micron): 10C±0.5C
Thickness of film with release liner: 27C±0.5C
Type of film: Polymeric vinyl film (silver coating) with new air release channels

Series: 180 series
Glue: Henkel solvent based adhesive
Release liner: White silicone-coated paper with double-sided polyethylene coating
Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place
Indoor life: 5 years when followed rules of application and use
Outdoor life: 3 years when followed rules of application and use
Application:from +17°С to +25°С, usage from -55°С to +65°С
Dimensional stability: shrinkage less than 0,20%
Plastification: between 23%-31%
Breaking Strength: 27.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05
7.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04
Light Ageing in UV Exposure:
Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5
Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-340
8h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 48h
Package: Roll width 152 cm, length 18 m, weight 13 kg

Important note: The images, colours and finishes on screen are approximate. For the real representation of the product always check the color swatch. Some metallization imperfections (small dark spots, lines) can be present in the product & slight color variation (waves) could occur but both are not to be considered as a defect. As a consequence, they will not be subjected to claims. Rolls from the same production lot number should be used for completing a wrap job as a slight batch to batch variation of color may occur. One need to handle metallized films with care as the appearance of the metallized layer could change upon crumpling, overstretching, too strong heating. Film may scratch during application, or during day in and out use. Scratching of the film is not covered by warranty.