GLOSS METALLIC DARK PLATINUM 152cm x 18m

Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). Comes in 25 gloss colors

Thickness of film (mm): 0.17-0.19mm

Thickness of film with release liner: 0.34-0.35mm

Type of film: High grade polymeric multilayered calendared vinyl film with air release channels

Colors: Fierce red, Deep blue, Rosaline Pearl, Passionate purple, Passionate purple, Grandeur Plum, Ocean wave, Acid lime, Coral peach, Caribbean blue, Amber brown, Silver chromium, Silver chromium, Dark platinum, Ash grey, Crystal Silver, Columbia blue, Sea Turquoise, Cerulean blue, Ocean green, Deep Orange, Midnight purple, Mexican pink, Kelly green, Mustard yellow, Zircon blue, Yellow gold

Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)

Series: 190 series

Adhesive: Solvent polyacrylate

Adhesive performance properties: (1mil adhesive on 1mil material, bonded to stainless steel panel)

180°Peel (PSTC-101), 20 minute bond – 2.2 lb/inch, 24 hour bond – 3.5 lb/inch

Release liner: Kraft white silicone-coated, paper with double-sided polyethylene coating

Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sun light, clean and dry place

Avg. indoor life: 4 years when followed rules of application and usage

Avg. outdoor life: 3 years when followed rules of application and use

Application: from +17°С to +25°С, usage from -55°С to +65°С

Dimensional stability: shrinkage less than 4%

Plastification: between 27%-35%

Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)

Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005,

Test result: 5

Exposure cycle: ASTM D4329-13 cycle A,

Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49h

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater

Application method: Standard methods for calendered films. No overstretching. Post heating

Post-heating temperature: 110℃ flat surfaces, 130℃ curves, and overlaps

Cure time: 24 hours above 10℃

Aftercare: PH neutral, Avoid wax or solvents